|
|
|
|
|
|
Fort Smith, AR: (800) 323-8806 |
|
© 2007 Boyd Metals, Inc. All Rights Reserved. Site Map |
|
|
HOME
|
|
|
|
|
|
|
|
|
|
Fort Smith, AR: (800) 323-8806 |
|
© 2007 Boyd Metals, Inc. All Rights Reserved. Site Map |
|
|
|
|
|
PRODUCTS
|
|
PRODUCT LISTING
RELATED LINKS |
|
Carbon Products Beams: "I" beams, Junior beams, Wide flange beams in ASTM A-36, ASTM A-572M, ASTM A-709M, A-992M specs Channels: Bar size channels, Ship & Car channels and Structural channels in ASTM A-36, ASTM A-529 Gr50, ASTM A-572 Gr50, SA36 & ASTM A-709 Gr36 specs Angles: Bar size and Structural size angles in ASTM A-36, ASTM A-529 Gr50, SA-36, ASTM A-709 Gr36 specs Rails: ASCE sections available in 30' random lengths Tees: Bar size Tees in ASTM-36 and ASTM A-709 Gr36 specs Hot Rolled Bars: Flats, Half Rounds, Half Ovals, Rounds & Squares in ASTM A-36, ASTM A-529 Gr50 and 8620 (rounds) specs Cold Finished Bars: Flats, Rounds, Hexagons & Squares in AISI C1018, C1045, 1117, 1144, 1215, 12L14, 4040, 8620, ETD150 specs Plates: Strip mill plate in ASTM A-36 and ASTM A-572 Gr 50. Discreet mill plates in ASTM A-36, ASTM A-514 GrB, ASTM A-572 Gr50, ASTM A588, ASTM A-516 Gr70, ASTM A656 Gr80, AR 235, AR400 & AR500 specs Floor Plate: ASTM A 786 Raised Pattern. Under ½" thick meets 1009. Over ½" thick meets ASTM A-36. Hot Rolled & Hot Rolled Pickled and Oiled sheets: ASTM A-1011 Commercial Steel, Type B, ASTM A-606 Type 4 and ASTM A-1011 High Strength Low Alloy Steel Gr 50 Class 1 Cold Rolled Sheets: ASTM A-1008 CS Type B in Commercial Steel and Drawing Steel, Oiled. Coated Sheets: ASTM A-653 CS Type B in G60 & G90 (Galvanized & Paintgrip) and A40 & A60 (Galvannealed), ASTM A 591 (Electro-Galvanized), ASTM A-463 T1-40 (Aluminized) specs Tubing: Round, square and rectangular mechanical tube to ASTM A-513 Type 1 (HR), Type 2 (CR), Type 5 (DOM) and ASTM A-519 (seamless). Square and rectangular structural tubing to ASTM A-500 GrB Pipe: ASTM A-53 Type F, A500 Gr B (pipe sized tubing)
|
|
|
|
CARBON STEEL |
|
Description A steel whose properties are determined primarily by the amount of carbon present. These steels rely on the carbon content for their structure. Apart from iron and carbon, manganese up to 1.5% may be present as well as residual amounts of alloying elements such as nickel, chromium, molybdenum, etc. Most of the steel produced in the world is carbon steel.
|
|
Processing Services
Production Saw Cutting to Length Flame Cutting Plasma Cutting Miter Cutting Production Shearing Cutting To Length From Coils Slitting Blanking Tees Split From Beams Rolling Forming Bending Galvanizing Pickling |
|
|
|
|
|
|